What are the measures to prevent deviations in the installation of steel structures

Category： Industry News

Time：2020-07-06

Because when we install, some mistakes will cause the effect of installation, do not achieve the effect we want, at this time, we can use some measures to remedy, Chengdu steel structure is one of them, so what are the measures to prevent deviations in the installation of steel structure!

1. The steel structure should be spot-checked and measured at the site, and the deformation should be corrected in time, and only after passing can it be installed.

2. Check and calibrate whether the measuring instrument is

intact and whether the measurement verification is expired to ensure the accuracy of the measuring instrument.

3. The compression deformation value of the steel structure and the shrinkage deformation

value of the joint weld should be considered when the steel structure is made, and the welding shrinkage deformation should be strictly controlled during construction, and the foundation settlement change should be paid attention to.

4. Select the appropriate time measurement to ensure the measurement accuracy.

5. After the steel structure is installed, reliable temporary fixing measures must be taken, or a stable unit must be formed to ensure the safety of steel structure construction.

6. The steel structure with installation deviation exceeding the allowable deviation should be adjusted in time, and the measurement value should be recorded for the out-of-tolerance steel structure that cannot be adjusted, and the visa should be accepted and filed after the design and the consent of the relevant unit.

Keywords： What are the measures to prevent deviations in the installation of steel structures

Related Information

Company News

Industry News

SAF Coolest v1.3 设置面板UUBSX-ZFNJ-EEAVE-ASZ

营业执照及SEO链接： License

无数据提示

Sorry, there is no content in the current column!

You can view other columns or return Home

SVG图标库请自行添加图标，用div包起来，并命名使用